null

Benefits of the Atlas 9KOH Overhead 9,000 lbs. Capacity 2 Post Lift - Blue/Yellow Version

$1,175.00
(0) Write a Review

Product Description

Product Description

 

The light duty Atlas 9KOHX lift is an economy designed overhead, clear-floor 2-post lift. The reliable chain-drive cylinders and dual safety system make this the perfect choice for “Mr. Homeowner” or small commercial shops looking to service cars, SUV’s and light duty trucks.  The 9KOHX can be adjusted to two different height settings, either 11′ 6″ or 11′ 10″, allowing it to fit in almost any standard garage.

The Atlas 9KOH has symmetric columns and specially designed arms that can be set in either the symmetric or asymmetric position. The asymmetric/symmetric arm design offers an extremely low lift pad position on the EZ-metric lift arm configuration. This low pad height will allow the operator to position the lift arms under most small cars (with low pick up points) and heavier pick up trucks. The Atlas 9KOHX two post “chain over roller” lifts have a spring loaded Secondary Lock System (SLS) that automatically engages in the event of a slack or broken chain.

The 9KOHX is the perfect choice for those who demand the most lifting capacity at the lowest possible price.

"This item is currently out of stock in Ontario at this time"

 

Highlights

  • 9,000 LB. Capacity
  • "Padded" Shut-Off Bar
  • Light Commercial Grade
  • Clear Floor Design
  • Asymmetric Arm Design
  • Dual Hydraulic Chain-Drive Cylinders
  • Powder Coat Finish
  • Secondary Lock System (SLS)
  • Dual Point Lock Release
  • Automatic Arm Restraints
  • Free 8 Piece Truck Adapter Set
  • Mounting Hardware Included
  • Shipping Weight: 1,450 lbs.

Specifications

Capacity 9,000 LB.
Overall Height 138" (11’ 6") or 142” (11’ 10”)
Overall Floor Width 134 1/2" (11’ 2 1/2")
Outside Column to Outside Column 124 7/8" (10’ 4 7/8")
Maximum Lift Height (Without Adapters) 74 1/2"
Maximum Lift Height (With Adapters) 81"
Minimum Arm Height 4"
Inside Column 110” (9’ 2”)
Drive Thru 100” (8’ 4”) Symmetric/ 90 1/2" (7’ 6 1/2”) Asymmetric
Column Size 7 1/4" x 11"
Column Thickness of Steel 5mm  
Base Of Lift 14 1/4" x 18"
Motor/Electrical Requirement 220 volt single (1) phase.
A 30 amp breaker is recommended
Oil Requirement 3-5 Gallons AW32/AW46 (NOT INCLUDED)
Shipping Weight 1,450 LBS.
Adapter Heights 4 Each 1.5”, 5”
Arm Hole/Adapter Peg Size 1.5”
 
Requires a minimum of 4" of concrete with a 3000 psi. rating
 
 

EACH PROVINCE, TERRITORY, MUNICIPALITY, OR LOCAL BUILDING ZONING AGENCY MAY HAVE ITS OWN UNIQUE SET OF CONSTRUCTION REQUIREMENTS, SEISMIC REQUIREMENTS, AND OTHER ELECTRICAL/INSTALLATION REQUIREMENTS THAT RELATE TO AUTOMOTIVE SERVICE EQUIPMENT. ISSUANCE OF A LOCAL BUILDING/OCCUPANCY PERMIT MAY REQUIRE APPROVAL FROM SOME BRANCH OF GOVERNMENT JURISDICTION. PLEASE CONTACT YOUR LOCAL BUILDING DEPARTMENT FOR A COMPLETE LIST OF APPLICABLE FEES OR REQUIREMENTS RELATED TO INSTALLING AND/OR OPERATING ANY OF OUR PRODUCTS (INCLUDING LIFTS, TIRE CHANGERS, WHEEL BALANCERS, ETC.)